Shall support remote control operation via external control system using Simple Instruction Set commands sent over RS-232 on 3-pole, 3.5 mm captive screw connector.
Shall support USB 2.0 control on female mini USB B connector.
Shall support bidirectional RS-232 on 3-pole, 3.5 mm captive screw connector.
Shall provide file upload in both Live and Emulate mode.
Shall provide file saving in both Live and Emulate mode.
Shall provide keyboard-based navigation software utilizing directional controls, keyboard shortcuts, and spreadsheet software-style commands.
Shall provide a Meter Bridge window for real-time metering of all input and output channels in Live mode.
Shall provide real-time meters of levels within each Input Gain and Output Volume processing block in Live mode.
Shall provide Soft Limits settings to define upper and lower control limits for use with external controls.
Shall provide integrated mix point gain adjustment between inputs and outputs.
Shall provide cut and paste editing between processing blocks.
Shall provide setup and configuration of digital audio processing tools including, but not limited to: Filters (high pass, low pass, bass, treble) and multiple gain stages.
Shall provide single window view of all inputs and outputs, audio processing blocks, and mix points.
#STEREO MIX PLUS SOFTWARE REVIEW OFFLINE#
Shall provide an Emulate mode for offline configuration.
Shall provide a Live mode for real-time control of parameters without compiling and file uploading to mixer.
Shall provide PC-based DSP Configurator software allowing flexible control of the unit’s digital signal processing tools, including mixing.
Shall provide a THD+N measurement of less than 0.02% measured at 1 kHz, at maximum output level.
Shall provide a signal-to-noise ratio greater than 100 dB measured from 20 Hz to 20 kHz, at maximum output, unweighted.
Audio Device Requirements - Input to Output.
Shall provide audio digital signal processing on all inputs and outputs.
Shall support mixing the two microphone or line level inputs, with the stereo line level input for output to dual stereo line level outputs.
Shall provide digital to analog conversion at 48 kHz sampling rate with 24-bit resolution.
Shall support one variable stereo line level, balanced or unbalanced signal on one 5-pole, 3.5 mm captive screw connector.
Shall support one fixed stereo line level, balanced or unbalanced signal on one 5-pole, 3.5 mm captive screw connector.
Shall provide analog to digital conversion at 48 kHz sampling rate with 24-bit resolution.
Shall provide selectable +48 volt phantom power for condenser microphones on each mic/line input.
Shall support one stereo line level, balanced or unbalanced signal on one 5-pole, 3.5 mm captive screw connector.
Shall support two mono, microphone or line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector.
Three input, two output stereo audio mixer with digital signal processing.
Provide a stereo audio mixer with a digital signal processing platform for audio signal mixing and control that shall support two mono analog inputs capable of microphone or line level signals, one stereo line level input, and two stereo line level outputs.